ASK A BRAND

It also has a 5V output, which a few of you might be interested in. This is a perfect supply for the kit. Connecting a 90 ohm power resistor in series with a. Because this unit is external, no AC enters your chassis. This means less potential for humm. Also, because the supply is outside, there are fewer size constraints on selecting your chassis. Finally, the fact that it’s prebuilt gets you up-and running in a shorter amount of time.

AMP200 High Current Class A/B 2 Channel Amplifier 200-Watts (2 Ohm stable) Bridged Mono 250-Watt

So far, I have only been able to use it once. Good support for bass guitar for the multipurpose room we were playing. The one sub handled my band nicely.

If you want to hype up the audio in your automobile, installing a subwoofer system is the best way to do it. There are different types of systems you can use to bring your car audio to the next level and holing up your car with one is easy enough if you have the proper tools and know-how.

Ask Question Step 3: I decided to not cut up my PSU cables as i may need the computer it came from at some point, you will need to find the pins shown in the pic, they are on the connector that was originally on your motherboard, the cables should be green and black, any black ground connector will do the trick. Now a quick check, turn on your PSU and if the fan spins you’re all set for the next step. Add Tip Step 4: Wiring Your Amp So you have your amp ready?

This is a good reference, it was made by BR14n https: I suggest using every except one, you need it later 12V rail there is that’s the yellow wires to ease the load. As the picture shows you need to connect your ground on your amp to the black ground cable from the connector. Once you have your two cables connected you’re ready for your next step. Add Tip Ask Question Step 5: Power Up the Amp Here’s where whether you’re using a headunit or not comes into play, I advise everyone to do this step as a test or as a completing step.

Get a small loop of wire and strip the ends, put one end in your remote on the amp and the other in the batt on your amp. This will mean that when you turn your PSU on the amp’s indicating light should turn.

Opinions on Yamaha A-S501 Integrated Amp?

Are you sure that you want to delete this answer? Yes Sorry, something has gone wrong. A powered subwoofer like a bazooka tube would be the easiest solution.

Feb 09,  · Do you need RCA outlet adapter to hook up system(sub and amp) to a honda civic coupe factory radio? Answer Questions My mother says she would not have alienated me from my father and step-mother had she known what it would do to : Resolved.

What is the best way to install an amp and subwoofer in a Pontiac Sunbird? Heyy what year and what model? I have a ’91 sunbird convertable that I did.. I have a ’90 Sunbird LE it n…ot a convertable Your computer doesn’t need a subwoofer, but it would be nice to have one. How do you install amp and subwoofers in car? To install a amp, You will need to purchess a wiring kit. The one taht says pos is positive.

That is where you put the red wire. The red wire connectes to your battery, before connecting it …though, the wiring kit should have came with a fuse setup. The fuse has to get connected to the red wire that comes with the kit. Typically you have to cut the red wire the one that came with the kit, not the one connected to the battery and put the fuse system in there put the fuse about 6 inches from the battery.

After doing that, don’t hook up that wire yet. The kit also came with a black wire.

Trying to decide: 2 8″ subs vs 1 10″ sub

But what the manufacturer is not showing you is the bandwidth vs. Quality of bass and how well it integrates into a system is paramount. If I have to sacrifice a bit of extension and SPL to achieve this, so be it. The Set-Up I left my EP towards the left front corner behind my couch as it has been for the past 3 years.

You can hook up 20 subs to a mono amp; BUT you have to co nfigure the speakers by impedance/ohms. if you hook two 2 ohm speakers to a 4 ohm steady amp in parallel you will soon buy a new amp. if you hook 10 speakers in series you will not even get it warm. Each speaker will also divide the available wattage and will not have a lot of power.

Watching a movie on a properly set up surround sound system, or listening to your music through a new set of speakers can be an amazing experience. But, the key to a great home theater isn’t just spending a lot of money. Setting up the system correctly is just as important as what you buy. This guide, very simply, walks through the basics of speaker placement, how to hook everything up, and how to change a few settings to really make your system shine.

Throughout this article are links to other articles that go into more depth on each topic. Be sure to also check out our related YouTube video discussions linked below for further insights. In most rooms you won’t be able to place your speakers in the perfect spots. It would be great if every room was designed with surround sound in mind, but alas, it isn’t. Still, there are some good rules to go by. The diagram below shows the ideal placement for speakers in a 7.

Notice how the speakers are perfectly set up for one seating location, the elusive “sweet spot”. Because most people are not hermits watching movies in solitude, you will probably have a variety of seating locations. When placing your speakers, you will need to decide if you want to optimize your system for one location or, as we prefer, place speakers so that individuals in a variety of positions can experience good quality surround sound.

Choosing to setup your system for multiple seating locations may also affect your decision to go with a 5.

How do u hook up the sub.

It provides the deep bass that most speakers lack and enhances both music and movie soundtracks. Whether you have a powered or passive sub, you’ll need to get it connected to your amplifier for it to work. This is a line level connection, which means it is not amplified. This connection is useful for powered subwoofers only. Connect using speaker wire.

If you’ve got two 4-ohm SVC subs and your amp is only rated for a 4-ohm load, then you’ll have to put them in series, even though you won’t be able to extract maximum power from the amp.

Trim panel removal tool Step 1: Installing the 12v Power Wire In your amplifier wiring kit, generally a red in color wire is the longest one, which is the 12v power wire. You need to pass the wire through the firewall. Start from the battery and pass on to the amplifier. However, do not connect the wire to the amplifier or battery yet. Removing the Stock Stereo Remove the stock car radio from the dashboard of your car. Make sure that you carefully remove the screws that hold the stereo in place ensuring that no wires are cut.

Installing the Remote Wire Once you remove the stock stereo, you will see a blue and white wire, which is basically your remote wire. This wire is located at the back of the stereo deck. Get the remote wire in your wiring kit. Once you splice it, solder this wire to the remote wire of your stock stereo. After this is done, run the remote wire through the dashboard and the door jam.

Once this is done, you can now run the wires back into the amplifier. Connecting the Subwoofer to the Amplifier With the speaker wires, connect the subwoofer system wiring to the amplifier.

Sign Up & Save 10%

How do you hook up an amp? Make sure that the power wire and aux cable are on opposite sides of the vehicle for less distortion and interference. MORE How can you hook up another amp to your sub amp for your 6×9?

I know that it’s fun to have gigantic speakers in your home theater when you want to impress your friends, but what size speakers are really necessary? Do you need really huge speakers, and are they worth it? Yes. Yes they are at all costs. The bigger the better!

Are you sure you want to delete this answer? Yes Sorry, something has gone wrong. You can even buy an adapter for the factory radio that will connect to your factory harness and then all the speaker wires are available without the harness being cut off. They come with a wiring diagram that is very easy to follow. After that, everything is the same such as: There is another harness adapter that plugs into the factory stereo and then gives you the wires you need for the rca adapter and then plugs back into the factory speakers for mids and highs.

You will be using a fused power wire from the battery to your amp. Nothing should change the antitheft part of the system. There is a turn on from just about any factory and aftermarket unit. They are used for auto antennas and not just turn on for factory or aftermarket amps. You can also use power from an ignition source for a remote turn on only, not for your amp’s power supply , if you do that, a 12 volt relay may have to be installed, so your turn on to your amp, doesn’t get a power spike and make a horrible popping sound when it turns on.

How to Match a Car Subwoofer and Amplifier


Hi! Do you need to find a sex partner? It is easy! Click here, registration is free!